adhesion strength
基本解释
- 粘附强度
英汉例句
- The adhesion strength and stripping and splitting prevention measure were also discussed.
同时研究了涂料的粘附强度、防裂、防剥落等措施。 - A(continuous) and compact electrode with the three-layer structure is formed at 950℃, and the adhesion strength of Ni electrodes is dependent on the middle layer.
烧结温度是影响镍电极致密化过程的重要因素，950℃时形成了连续、致密的三层结构电极，中间层与镍电极附着强度相关； - The results show that the interfacial adhesion strength increased noticeably for composites of active aramid fiber but the fracture energy of the interface decreased.
实验结果证明，芳纶表面改性显著提高了其复合材料界面的粘结强度，相反却降低了其界面断裂能。
双语例句
词组短语
- adhesion shear strength 黏结强度
- adhesion n strength 胶粘强度
- Adhesion strength to backing 剥离强度
- Adhesion Strength And 剥离强度和
- Adhesion strength of laminate 粘合强度
短语
专业释义
- 粘附稳定性
- 结合强度
Cross section micrographs and adhesion strength of the coatings were analyzed by TEM and scratch tester. The results show that:both the thickness of physical mixed interface layer and Cr bond layer was reduced significantly with the basic pressure decreased.
利用TEM、划痕仪分析了不同真空度下镀层微观截面形貌与结合强度的变化。 - 粘接强度
- 结合强度
Interlayers and transition layers was introduced to improve the adhesion strength of the coatings.
通过引入中间过渡层的方法来提高涂层与基体的结合强度。 - 附着强度
Effects of the components and contents of binders on the thick film properties have been investigated. It was found that when the glass content was 10%, film adhesion strength achieve maximum (11.6MPa).
研究了玻璃粘结剂组成、含量对金属化膜层性能的影响,实验发现当玻璃含量为10%时,Ag导体层与AlN基片之间附着强度最大(11.6MPa);在固含量不变的情况下,随着玻璃含量的增加,方阻逐渐增大。物理学
- 粘合强度
- 粘着强度
- 胶粘强度