brass rod

基本解释

I cut brass rod of appropriate diameter and oversize in length.
i削减黄铜棒适当的直径和特大型在长度。
I´ve shaped both parts of the bottom rudder and installed a piece of 5/32" brass tubing in (part 1) to house the 1/8" brass rod.
我已经形的两个部分底部的舵和安装了一块5 / 32 “黄铜油管在（第一部分），以容纳1 / 8 ”黄铜棒。
www.tech-domain.com
After installing the 1/8" brass rod, I cut four (4) pieces of 5/32" brass tubing approximately 2" long. These were slipped over the brass rods on either side of both hatches.
安装后的1 / 8 “黄铜棒，我削减四（ 4 ）件5 / 32 ”黄铜油管大约有2 “ ，只要这些下跌超过黄铜棒对任何一方都舱口。
www.tech-domain.com