brazing filler metal
基本解释
- [机] 钎料;硬钎料
英汉例句
- This kind of brazing filler metal had a good filling performance, at the same time, sound high-temperature strength and impact toughness can be obtained in the joint.
该钎料不仅具有较好的填缝能力,同时获得的钎缝接头具有良好的高温强度和抗冲击性能。 - This paper introduces the connection using the brazing technique, selects corresponding brazing filler metal and flux together with proper technology, and determines the techniques and measures.
介绍了采用钎焊的方法进行连接;选择了相应的钎料与钎剂;并确定了工艺及措施。 - Results show that the brazed joint with good quality can be got by using the reasonable brazing filler metal and proper brazing flux (HL401+QJ201) and the optimum brazing technological parameters.
研究表明,采用合理的钎料和钎剂组合(HL401+QJ201)以及正确的钎焊工艺参数可获得质量良好的钎焊接头。
双语例句
词组短语
- active brazing filler metal 活性钎料
- composite brazing filler metal 复合钎料
- brazing filler metal ring 钎料环
- brazing filler metal erosion 钎料流失
- glass brazing filler metal 玻璃钎焊料
短语
专业释义
- 钎料
The ideal composition of brazing filler metal has been obtained by investigating the wetting between diamond and filler metal, the bond strength of joint and observing the microstructure of interface. The wetting angle has been about 20?
通过对金刚石的钎焊性及活性钎料的研究,借助金刚石与钎料的润湿实验、接头的强度实验、焊缝结合面的微观分析,得到较理想的焊接金刚石的钎料成分,使得金刚石与钎料的润湿角小于20°。机械工程
- 钎料
- 硬钎料