94生活常识网有道词典

clamp

C 开头单词六级词汇专四核心词专八核心词雅思备考词GRE词汇词源字典

音标发音

  • 英式音标 [klæmp]
  • 美式音标 [klæmp]
  • 国际音标 [klæmp]
  • 英式发音
  • 美式发音

基本解释

  • v. 夹紧，固定住；用夹锁锁住（车）；保持（电信号）电压极限在规定水平
  • n. 夹钳，螺丝钳；车轮夹锁（用于锁住违章停放的车辆）；贮藏于稻草（或地底）下的一堆马铃薯（或其它块根蔬菜）；青贮饲料堆的三面结构

词源解说

  • 直接源自古荷兰语的klampe，意为夹子。

同根派生

     

英汉例句

    用作动词 (v.)

    用作及物动词: S+～+ n./pron.

  • The policeman clamped handcuffs around his wrists.
    警察给他戴上手铐。

    • 用作名词 (n.)

  • He used a clamp to hold the arm on the chair until the glue dried.
    他用夹子将扶手夹在椅子上,直到胶水干后再取下。

词组短语

    短语

  • voltage clamp 电压钳;钳位电压;理想电压箝位;电压钳制
  • hose clamp 软管夹，软管夹子；软管卡
  • wire clamp 线夹，钢丝钳
  • clamp ring 夹圈;锁紧圈;压紧环;卡环
  • clamp strength 夹紧力;定位方案;工位;夹紧

英英字典

    剑桥英英字典

  • a device made of wood or metal that is used to hold two things together tightly
  • (FASTEN) to fasten two things together, using a clamp
  • (HOLD TIGHTLY) If you clamp something in a particular place, you hold it there tightly.

    • 柯林斯英英字典

  • A clamp is a device that holds two things firmly together.
  • A clamp is a large metal device which is attached to the wheel of an illegally parked car or other vehicle in order to prevent it from being driven away. The driver has to pay to have the device removed.
  • When you clamp one thing to another, you fasten the two things together with a clamp.
  • To clamp something in a particular place means to put it or hold it there firmly and tightly.
  • To clamp an illegally parked car means to fit a device to one of its wheels so that it cannot be driven away.

专业释义

    能源科学技术

  • 夹钳

    Tensile testing results showed: to compare half-round clamp with V-type clamp,the proportion of specimen cracking in jaw decreased from 64% to 16%,the proportion of specimen slipping from 22% to zero,the accuracy of testing data were guaranteed.
    拉伸试验结果表明:半圆形夹钳与V形夹钳相比,试样断钳口比例由64%降到16%,打滑比例由22%降为0,保证了试验数据的准确。

  • 线夹

    • 电子、通信与自动控制技术

  • 钳位

    At the same time to protect the chip, the RCD clamp circuit is designed.
    同时为了保护芯片,设计了RCD钳位电路。

  • 箝位电路

    A clamp circuit whose threshold can be adjusted with respect to the magnitude of the slope compensation signal is also designed to cancel the slope compensation effect on current limit.
    同时设计可根据斜坡补偿信号幅度进行阈值自调节的箝位电路,消除了斜坡补偿对芯片带载能力的影响。

    机械工程

  • 夹具
  • 夹紧
  • 夹钳
  • 夹器
  • 夹
  • 线夹

    • 计算机科学技术

  • 夹钳

    Finally carrying on the dynamic simulation of the clamp with the process of squeezing and lifting the steel coil and analyzing the results reasonable.
    最后运用机械系统动力学仿真软件ADAMS对夹钳闭合夹取钢卷和起吊吊运钢卷这两种工作状况进行了动力学仿真,并对结果进行了合理有效的分析。

  • 钩
  • 钳位
  • 夹

    • 交通运输工程

  • 夹具

    According to clamp design principle, designs the clamps using in the system, offers the clamps and the sketch maps of hardware fixing.
    围绕着液体测量的方法进行了硬件上的选择,搭建了本系统的硬件结构,给出了各个硬件具体的安装示意图。 并且根据夹具设计的原则专门设计了本系统所需要用到的夹具,给出了夹具设计图。

    土木建筑工程

  • 夹具

    In addition, the method of affixing carbon fabric for the inner corners of specimens with steel pipe clamp is effective and reliable.
    另外,在构件阴角部位粘贴碳纤维布采用钢管夹具夹持施加外力的技术方案可行,且具有较好效果。

    农业科学

  • 握索器

    • 生物学

  • 夹板