rheological behavior
基本解释
- 流变特性;龄行为,龄性行为
英汉例句
- The results show that the dispersant and its dosage not only influence the apparent viscosity but also the rheological behavior of CWS.
结果表明,分散剂的种类和用量不仅影响CWS的表观黏度而且还影响其流变特性。 - The analysis and simulation for the microstructure images of minced food material are key processes in quantitatively studying the influence of microstructure pattern on rheological behavior.
糜状食品物料微观结构图像的分析和模拟是定量研究其微结构模式形态对流变特性影响的关键问题。 - Rheological behavior of non-Newtonian fluid in viscous oil reservoirs and flow characteristics in water flooding are important factors influencing oil recovery rate and oil recovery factor.
稠油油藏原油的非牛顿流体流变特性和在注水开发中的渗流特性是影响采油速度和原油采收率的重要因素。
双语例句
词组短语
- Dynamic rheological behavior 动态流变行为
- rheological behavior of polymer 聚合物流变性
- Chemical rheological behavior 化学流变行为
- high temperature rheological behavior 高温流变行为
- rheological behavior of slurry 料浆流变性
短语
专业释义
- 流变行为
Rheological behavior is very important in the application of paint.
流平性和流挂性是涂料应用中非常重要的问题,而树脂的流变行为直接影响涂料的流平性、流挂性及最终产品的外观。 - 流变性
The influence of the EPDM content on the mechanical properties and thermal properties of the blend was studied. The rheological behavior of the blend as well as the relation between the injection mould parameters and the mold skrinkage was studied.
考察了EPDM含量对共混材料力学性能、热性能的影响,研究了共混材料的流变性能,以及注射成型工艺条件与成型收缩率之间的关系。 - 流变特性
At high shear rate, most of dispersion exhibited the same rheological behavior as it at low shear rate.
在高剪切速率的条件下,大部分分散体系的流变特征均表现出与低剪切速率下相同的流变特性。 - 流动行为
- 流变行为
The rheological behavior of PP/nano-CaCO3 In-situ composites was investigated using capillarity rheometer.
利用毛细管流变仪研究了PP/纳米碳酸钙原位复合材料的流变行为。 - 流变特性
The influence of rheological behavior of slurry on density of green body was very distinct, and the key of getting high density of green body was that slurry had low viscosity at low shear rate.
料浆的流变特性对坯体密度的影响显著,在极低剪切速率下料浆的低粘度是影响坯体密度的关键。 - 龄行为
- 流变性
The results show that the rheological behavior of semi-solid AZ91D Magnesium alloy is favorable when the stirring temperature is 570°C and the shearing rate is 88.85s~(-1).
结果表明,在搅拌温度为570℃,剪切速率为88.85s~(-1)的工艺下所制得的半固态镁合金AZ91D具有良好的流变性能。地球科学
- 龄性行为