socket wrench

常见例句

Use socket wrench to remove regulator seat for replacement.
采用套筒扳手来拆卸调节阀阀座进行更换。
Remove the screw-in elements by turning the element counterclockwise with an 1-1/2 inch socket wrench.
使用1.;5英寸的套筒扳手按反时针方向旋转拆卸加热元件上的螺丝。
Hand tools: Hex socket wrench: DIN911 “L” and “Z” and other non-standard hardware stampings.
手工具:内六角板手:DIN911和Z 字形;及其它非标的五金冲件!
Align the bushing with the spring eye or shackle eye and tighten the nut at the socket wrench end of the threaded roTighten until the bushing is forced into the spring eye.
将衬套对准弹簧眼或U型钩眼，并在螺纹杆的套筒板手末端锁紧螺帽。锁紧直到衬套进入簧眼。
Open end or socket wrench.
英寸开口末端或套筒扳手。
Using a 9/16" socket wrench or nut driver, remove the four nuts from the #1 check studs (See fig. 1) Using two hands, place them at 12 o'clock and 6 o'clock, wiggle the check assembly free.
采用一把9/16英寸套筒扳手或螺母起子，用两手从1号止回阀柱头螺栓（参阅图1）上拆卸四个螺母，将其放置在12点和6点的位置，摆动拆卸止回阀总成。