static load test

基本解释

In the engineering practice the method of static load test is usually used to evaluate the capacity and working status of the existing structure.
工程实践中常常采用静载试验的方法评定既有结构的承载能力及工作状态。
The compression of the pile in the pile group can be determined by static load test. The settlement of the pile toe is calculated by layer wise summation method.
群桩中桩身压缩由单桩静载试验得到的桩顶沉降与桩端沉降之差求得，群桩的桩端沉降由分层总和法计算。
In this article, the author analyzes the causes of abnormal static load test of pipe pile in soft soil stratum, puts forward reasonable advices from design and construction aspect.
对软土地质条件下管桩静载荷试验异常原因进行研究分析，从设计和施工角度提出了合理建议。

静载试验
Comparing with the static load test and high strain dynamic test, this method is cheaper and nondestructive. It can check all the piles of site and make up the deficiency of other methods.
与静载试验、大应变动力测桩方法相比具有成本显著降低、效率高、无破损等特点，从而可实现现场基桩承载力的100％检测，打破以往基桩承载力只能抽检的局面。
静载荷试验
Comparing with the result of static load test, the regulative coefficient is received.
同时提出与场地静载荷试验结果进行对比，得到调整系数，提高预测精度。
静荷载试验

静载试验
Currently, the most accurate method of pile bearing capacity - settlement curve is static load test, but done a lot of static load test in advance is very difficult, so application in large scale is obviously unrealistic.
目前,公认的桩基承载力-沉降曲线最准确的办法是静载试验,但提前做静载试验有诸多难处,大量推广应用显然是不现实的。
静载荷试验
The construction process and load-bearing characteristics of cast-in-situ concrete thin-wall pipe piles have been analyzed based on their application in soft soil improvement of Yan-Tong Expressway. The low strain test, static load test and excavation also have been performed in-situ.
结合现浇薄壁管桩在盐通高速公路软基加固中的应用,对管桩施工方法和承载特性进行了分析研究,并进行了小应变测试、静载荷试验和现场开挖等检测分析。
静载实验