tear strength

基本解释

Results: The tear strength of SY-1 silicon rubber was better than that of MDX4-4210 silicon rubber.
结果：SY-1硅橡胶吸水率、溶解率性能差于MDX4-4210硅橡胶，撕裂强度优于MDX4-4210硅橡胶。
The results showed that NBR/PVC blends exhibited good oil-resistance, ozone-resistance, and their breaking strength and tear-resistance strength were also rather improved.
结果表明，NBR/PVC共混硫化胶具有突出的耐油、耐臭氧老化性能，拉伸强度、定伸强渡和撕裂强度也较NBR有所提高。
In the same Cl content, if the Cl content ratio of two steps decreases, the crystal content and tear -resistance strength decrease, but the elongation and melting index increase.
结果表明：氯含量相同时，两段氯化程度比值减小，结晶度降低，断裂伸长率上升，撕裂强度下降，熔体指数增大；

The polymers return to a pre-defined shape when heated to a certain temperature, and, when damage is detected, an infrared laser sends light through the network to the damaged area, triggers the shape-memory, and commands the area to repair the crack or tear -- regaining up to 96 percent of its original strength.
ENGADGET: Shape-memory polymer knows when it's hurt, fixes itself
Optim insulation is a hybrid material that combines the biostability and flexibility of high-performance silicone rubber with the strength, tear resistance and abrasion resistance of polyurethane, to provide increased durability and flexibility.
FORBES: St Jude Withdraws Older LV CRT Leads From Market

撕裂强度
On this base, we study the influence of percent NCO in prepolymer and quantity of chain extender on the qualities of product. These qualities are mainly mechanism qualities, including rigidity, flexibility, die C tear strength, and so on.
在此基础上，又探讨了异氰酸酯基含量以及扩联剂用量对聚氨酯弹性体最终产品性能的影响，这些性能主要是机械性能，如：硬度、弹性模量、拉伸强度、撕裂强度、扯段伸长率以及回弹方面的性能。
机械工程
撕裂强度