water quenching

基本解释

• 水淬火

英汉例句

双语例句

• The circumstance of service was simulated by water quenching and the thermal stress was analyzed.
  利用水淬法模拟其服役状况并用有限差分方法对产生的非稳态热应力进行了分析。
• Experiments for hot mold shell with isolated hot spot by local water quenching in investment casting before and after pouring were conducted.
  对熔模铸件孤立热节热型壳进行了浇注前及浇注后局部水淬激冷试验。
• However, brine or water quenching is capable of rapidly bringing the surface of the quenched part to its own temperature and maintaining it at or close to this temperature.
  然而盐水或水淬火能够将被淬零件的表面迅速冷却至本身温度并将其保持或接近此温度。

• water quenching更多例句

词组短语

短语

• water soluble quenching liquid 水溶性淬火剂
• water base quenching 水基淬火液
• low water coke quenching 低水熄焦
• water -quenching steel 水淬钢
• low water coke quenching process 低水熄焦工艺

• water quenching更多词组

专业释义

能源科学技术

• 水淬

  Fine lath martensite can be obtained in the core part of the steel with diameters of 26 mm under 880℃(20℃water quenching)and 940℃(37℃water quenching).
  淬火加热温度880℃(20℃水淬)及940℃(37℃水淬)热处理条件下,直径为26 mm的试验钢心部可获得细小的板条马氏体。

• 水冷

  Compared with 00Ni14Cr3Mo3Ti maraging steel, the Cr content of 00Ni13Cr9MoTi maraging steel increases from 3.19% to 8.92% so as to reduce Ms point to 60℃. So water quenching is needed before cold treatment 2h at -73℃.
  和00Ni14Cr3Mo3Ti马氏体时效钢相比,00Ni13Cr9MoTi马氏体时效钢的Cr含量从3.19%增加到8.92%,使得Ms降到60℃,所以在770-1050℃固溶处理后水冷,并在-73℃冷处理2h,使γ→α转变时奥氏体尽可能多的转变成马氏体,以保证钢有足够高的强度。

  机械工程

• 水淬火