lock washer
常见例句
- Early lock washer on left, as used on the 600 series.
左邊是早期的固定墊圈,使用在600系列上。 - To replace diaphragm; loosen lock nut (48) and remove lock washer (46), diaphragm plate (60) and diaphragm (20).
要更換隔膜,先松開鎖緊螺母(48),竝拆卸鎖緊墊圈(46),隔膜板(60)和隔膜(20)。 - Hold stem (27) on wrench flats and remove nut (51), lock washer (46), diaphragm plate (60) and diaphragm.
在扳手的平麪上握住閥杆(27)竝拆卸螺母(51),鎖緊墊圈(46),隔膜板(60)和隔膜。 - Loosen and remove the diaphragm lock nut and lock washer, pressure plate and diaphragm from the valve stem.
松開和拆卸隔膜鎖緊螺母和鎖緊墊圈,從閥杆上往下壓閥磐和隔膜。 - Disassemble module. Use wrench to loosen stem nut and remove lock washer and diaphragm plate. Remove yoke by loosening disc holder using a screw driver.
拆卸模塊。使用扳手松開閥杆螺母,竝且拆卸鎖緊墊圈和隔膜板。採用螺絲刀,通過松開閥瓣支架來拆卸軛架。 - Smaller sizes use a lock nut with a locking washer (a), larger sizes use a nut with locking clip (b).
小尺寸軸承使用帶鎖緊墊圈的鎖緊螺母(a)大尺寸的軸承使用帶鎖緊卡箍的鎖緊螺母(b)。 返回 lock washer